Electrolysis Products

Available Here

 
     
 
lefttop
 

 

Electrolysis Products

Electrolysis Arrestor

  Item Name: Electrolysis Arrestor
Item Price: $25.50
Item SKU:   420E
  • Suppresses, reduces and eliminates Type B electrolysis
  • Easy to install
  • Can be used as a prevention additive
  • Helps keep antifreeze clean
  • Keeps working for 2 years
  • Controls pH
  • Can be used alone, or as part of a process
 
 
Product Description

MSDS 1
MSDS 2
The heart of the chemistry remediation  process, The Arrestor is an additive that actively suppresses the destructive effects of Type B electrolysis. When used after The Flusher, it is added to new coolant and keeps working for the life of the antifreeze. It will control pH, help the coolant to remain non conductive, and contains an oxygen scavenger to prevent cavitations, erosions, and pitting.

Hands on research* has shown that The Arrestor is a solid performer whether used as a preventative additive, or as part of a chemistry remediation program. Good choice for at risk vehicles  even if no electrolysis is measured. The Arrestor "floats" cooling system impurities to the surface where they can be expelled out the cap. Sometimes these impurities have "collected" in the overflow tube and plugged the tube solidly. Regular check of coolant and tube recommended. 
The Flusher should be used before The Arrestor, and a  Coolant Filter and Anode Cap  are solid add-ons whenever The Arrestor is called upon. Drops in voltage occur over time, sometimes in days, sometimes in months. The more thorough the flush, the faster the result.
Back to Top

Anode Radiator Cap

  Item Name: Anode Radiator Cap
Item Price: $26.00
Item SKU:   RC-**
  • Attracts electrolysis to itself
  • Easy to install, easy to check, easy to replace
  • Saves expensive aluminum parts
  • Works on Type A and Type B electrolysis
  • Starts working immediately. No waiting for chemistry to work
  • *Please include vehicle Make-Model-Year-Engine when ordering*
 
Make/Model/Year
 
Product Description This ingenious device attracts electrolysis to it, saving the aluminum parts from being attacked. Made of magnesium, the anode works 24/7. Whether used as a prevention additive, or as part of the remediation process, this sacrificial anode is an important element of the overall strategy. Since electrolysis is "lazy", and takes the path of least resistance, electrolysis will attack the sacrificial anode, leaving our aluminum components unharmed and intact.

Hands on research* has show a significant reduction in available electrolysis voltage when using The Anode. When used with The Arrestor, our experience shows a long term voltage drop can be achieved and maintained. The Anode will also attract other cooling system contaminates that can then be easily removed. Regular inspection of reservoir and overflow tube suggested, as tendency to "float off" debris to reservoir has been observed.
Back to Top

Coolant Filter


Item Name: Coolant Filter
Item Price: $39.95
Item SKU:   CF
  • Removes particulates
  • Provides perfect cooling system bleed point
  • Installs easily in 10 minutes
  • Has filter bypass circuit
  • Looks good under the hood
  • Durable construction
 
Heater Hose ID
Product Description

Coolant Filtering and inspection has never been easier. Helps keep a cooling system clean, and may very well preserve your heater.

This product was developed while searching for a cause of heater failure. It was found that under peak conditions as much as 40-50 psi could be recorded entering the heater. Combined with the fact that old coolant was particle rich and corrosive, The Coolant Filter was born. Designed to remove particulates, reduce surging pressure, and provide a visual representation of the coolant, the filter is durably made of polished metal and tempered glass. Part of the effectiveness is the magnetic particle trap that pulls out pieces of metal before they drift off somewhere in the block and start rusting. A cleanable sintered brass particle filter  strains particulates and keeps them from entering the heater. Since this durable unit comes apart easily, an on going coolant clean up is assured. 

 

Hands on research* with similar products shows a reduction of repeat failures due to pressure expansion. Many copper/brass heaters suffer from pressure expansion and greatly benefit from a pressure regulating system like this. Dex-cool debris is easily trapped and filtered by this unique product. You won't believe how well it works. In some vehicles, there may be inadequate under hood room for proper installation, and may require a "loop" of heater hose to accomplish installation. 

Back to Top

One Way Ground

  Item Name:  One Way Ground
Item Price: $9.95
Item SKU:   1WG
 
 
Product Description An economic way to add a layer of protection to aluminum heaters. Ruggedly built with braided flat cable, this may be one of the best values around.
Back to Top

Copper/Brass Heater Expedition/F-150


F65H-18476-AA
  Item Name: Copper/Brass Heater F-150
 Item Price: $250.00
 Item SKU: 8343CBH
  • Naturally Resistant to Electrolysis
  • Hand made in the USA
  • Limited Quantities    *Only 1 left in stock*
  • *Please include Make/Model/Year when ordering*
See application notes below
Make/Model/Year
 





Available by popular demand, this upgrade unit is strong and efficient. Why spend 8 hours removing the console and dash to install a cheap aluminum heater that you know is going to fail! This heater is hand made in very small batches, with strict quality control. Limited quantities available. Although briefly available through the aftermarket, copper heaters are no longer mass produced due to the cost and complexity of manufacturing. Aluminum is cheaper, lighter, stronger, and easier to make (in big batches), but has no resistance to electrolysis. Cooling system components made from copper brass are naturally resistant to electrolysis, and will survive quite nicely in a variety of contaminated environments. Copper brass heaters with simple reinforcement and pressure regulation will outlast aluminum heaters, and have natural resistance to electrolysis. Consider a Copper/Brass heater unless you want to "do the job twice".  Note: The Ford quick couplers need to be cut off and discarded. Regular hoses clamps will attach the heater hoses. This heater measures 7-3/4 x 7-1/2 x 2. Both inlet and outlet are 5/8.

Application
1997-2002 Expedition
1996-2004 F Series (new body style)
1998-1999 F-250
2003-2004 F-250 Super Duty
2003 F-450 Super Duty
2002 Lincoln Blackwood
1998-2002 Lincoln Navigator
Front heater only
       -------------------------------------------------------------------------------------------------------------------------
Hands on research* shows a strong preference for copper brass material when an electrolysis situation is encountered. Recommended strongly is the Coolant Filter, or other pressure regulating device to reduce the pressure surging effects that some vehicles have. With pressure regulation and simple reinforcement, the Copper Brass heater will go in a variety of applications with no further problems.
Back to Top

Oil Emulsifier

  Item Name: Oil Emulsifier
 Item Price: $17.50
 Item SKU:  L-11
  • Dissolves oily mess and makes clean up easier
  • 16 fl oz. Made in the USA
  • Use this when head gaskets blow, or in charge air cooler clean-up after a turbo failure.
  • Contains powerful petroleum distillates that dissolve oily foam and allow it to drain out.
MSDS
Product Description L-11 effectively emulsifies and dissolves  oily residue by changing it's properties, allowing it to drain out. Cleaning up a cooling system after a failed head gasket or leaking oil cooler just got easier. If this oil residue is not removed, efficient heat transfer is hindered in the radiator, causing overheating. Additionally, rubber hose failure is virtually guaranteed as the oil residue softens and destroys rubber.  In heavily contaminated cooling systems, additional  applications may be required to completely remove all the oil residue.

Hands on research* reveals T-11 to be effective when used to clean up oil saturated cooling systems and charge air coolers. Safe for all metals including aluminum. Strongly consider replacement of all rubber hoses and pressure cap as the oil will dissolve the rubber.
Back to Top

Cooling System Treatment

RMI-25   Item Name: RMI-25 Cooling System Treatment
 Item Price: $17.50
 Item SKU:  RMI-25
  • Naturally Resistant to Electrolysis
  • Made in the USA
  • Provides extra lubricant for water pump
  • Contains a UV dye
Cooling System Treatment and Conditioner
Product Description RMI-25 provides an extra layer of protection for the cooling system by incorporating a water soluble oil for increased water pump life. Used extensively in the Commercial, Industrial and Agricultural fields, RMI-25 might be over engineered for a well maintained lightly used automobile, however if you need a little more protection than a gallon of coolant gives, RMI-25 might be for you. UV dye is part of the chemistry make up of RMI-25 which makes finding small leaks over time a bit easier.

Hands on research* reveals RMI-25 to be very useful in situations where a cooling system is being restored . Dirty rusty corrosive cooling systems need to first be flushed, repaired and then refilled with 50% new coolant concentrate and RMI-25.
Back to Top

 

 

 

 

 

 
righttop